一、性能特點
Features:
1、 采用國內新型的大傳動機構，由排鏈帶動主傳動軸，免除了其它齒輪傳動的誤差和噪音。
It adopts the newest type high-power transmission mechanism to arrange the chain and drive the main driving shaft. The errors and noises of other gear wheel transmission can be avoided.
2、 電器采用進口控制系統，便可按照客戶要求，配置缺料漏補裝置和缺粒檢測剔除裝置。
Imported controlling system is adopted; also it can be equipped with detecting and rejection function device for number of medicines according to the user’s requirement.
3、采用光電控制系統，PVC、PTP、硬鋁包裝自動送料、廢邊自動沖切裝置，確保超長距離多工位同步穩定性。It adopts photoelectrical controlling system to make PVC, PTP, Aluminum/Aluminum material to be automatically fed and waste side to be cut automatically to guarantee the Synchronous stability of over- length distance and multi stations.
4、可另配光電檢測校正裝置，配進口步進電機牽引，圖文對版印刷包裝，優化包裝物檔次。It can be optional equipped with photocell correction device, imported stepper motor traction and image- character register to optimize packing grade.
5、本機適用行業：食品、藥品、科研、五金、電子泡罩密封包裝。The machine is suitable for industries of foodstuff, medicine, medical instruments, hardware, electronics and etcfor packing.
二、技術參數 Technical Specification
型號 Model | DPP-80 |
沖裁次數 Punch frequency | 10-33次/分 10-33times/min |
生產能力 Production capacity | 2400版/時 2400plates/hour |
**成型面積及深度 Max. Forming area & Depth | 105x70(標準深度≦15）（mm）**深度25mm（定制） 105x70(standard depth ≦15mm), Max. Depth 25mm( As adjusted |
標準行程范圍 Standard Stroke range | 30-80毫米( 可按客戶要求設計 ) 30-80mm(can be designed as per user’s required) |
標準版塊 Standard plate size | 80*57mm ( 可按客戶要求設計 ) 80x70mm (can be designed as per user’s required) |
空氣壓力 Air pressure | 0.4-0.6兆帕 0.4-0.6Mpa |
耗氣量 Compressed air required | （空壓機）≥0.3m3/min Air compressor≥0.3m3/min
|
電源總功率 Total power supply | 220V 50Hz 2.8Kw |
主電極功率 Main motor | 0.75Kw |
PVC硬片 PVC hard Film | 0.15-0.5*110毫米(mm) 0.15-0.5*110 (mm)
|
PTP鋁箔 PTP Aluminum film | 0.02-0.035*110毫米(mm) 0.02-0.035*110 (mm) |
透析紙 Dialysis Paper | 50-100g*110毫米（mm） 50-100g*110（mm）
|
模具冷卻 Mould cooling | 自來水或循環水 Tap water or Recycling water |
外型尺寸 Overall Dimension | 1840x900x1300毫米(mm)(LxWxH) 1840x900x1300 (mm)(LxWxH) |
重量 Weight | 凈重480千克（Kg）毛重 550（kg) Net 480kg Gross weight: 550kg |
噪聲指標 Noise index | <75dBA |
三、工作流程
Work process
1、 成型（上下加熱）
Forming ( up and down heating)
2、 熱封（上加熱）
Heating Sealing ( up heating)
3、 打碼
Embossing
4、 壓痕（可微量加熱）
Impression
5、 切刀
Cutter
6、 成型輸出成品
Finished product output
四、樣品圖
Sample picture:
五、電器元件
Electrical components:
DPP-80 鋁塑泡罩包裝機 標準配置清單 Standard configuration list of DPP-80 Liquid Blister packing machine |
序號Item | 名稱Name | 規格/型號Spec./Model | 品牌Brand | 數量Qty |
1 | 牽引氣缸Traction Cylinder | SSA φ32×15 | 考格爾Kaogeer | 2 |
2 | 主電機Main Motor | CH28 1H750W | 浙江臺邦Zhejiang Taibang | 1 |
3 | 成型加熱板Forming heating plate | 130×110×22 | 浙江宏星Zhejiang hongxing | 2 |
4 | 熱封加熱板Heating sealing plate | 115×80×22 | 浙江宏星Zhejiang hongxing | 1 |
5 | 變頻器Frequency inverter | DVM-2S007G-05 | 德萊爾Zhejiang delaier | 1 |
6 | 加料器電機Material Feeding motor | 70-CK-25-K | 瑞安邁力Zhejiang Maili | 1 |
7 | 電熱偶Thermocouple | WRKT-01 | 中國臺灣泰仕Tes Taiwan | 2 |
8 | 空氣斷路器Air circuit breaker | DZ47-63/10A | 施耐德Schneider | 1 |
9 | 空氣斷路器Air circuit breaker | DZ47-63/6A | 施耐德Schneider | 2 |
10 | 空氣斷路器Air circuit breaker | DZ47-63/25A | 施耐德Schneider | 1 |
11 | 微型繼電器e micro relay | LNY2 | 歐姆龍omron | 5 |
12 | 觸摸屏Touch screen | ST700 | 西門子Siemens | 1 |
13 | 固態繼電器Solid relay | SSR-40DA | 中國臺灣陽明Taiwan Forke | 2 |
14 | 電磁閥Electromagnetic Valve | SG4V210-08 | 中國臺灣亞德客AirTAC | 3 |
15 | 急停按鈕Emergency button | Y090-/11 | 西門子Siemens | 1 |
16 | 開關電源Switching power supply | S-50-24 | 中國臺灣明緯Taiwan Ming weft | 1 |
17 | 光電傳感器Photoelectric sensor | PL-05N | 中國臺灣陽明Taiwan yangming | 3 |
18 | PLC | CPU224CN | 西門子Siemens | 1 |
19 | 溫度模塊Temperature module | EM231CN | 西門子Siemens | 1 |
20 | 調速模塊Speed control module | EM232CN | 西門子Siemens | 1 |
21 | 編碼器The encode | E6B2-CWZ6C | 歐姆龍 | 1 |
液體灌裝的說明
1、采用柱塞式計量泵執行灌裝，精度高；泵的結構采用快接式拆卸機構，便于清洗、消毒。
2、PLC控制系統，彩色觸摸屏顯示。
3、灌裝針頭設有防滴漏裝置。
4.灌裝精度±05% 灌裝倆常規：5-25毫升（裝量客戶根據客戶定制）
5、機器外殼和接觸液體部分由不銹鋼材料制成，符合GMP標準。
The features of lquid filling
1. It adopts plunger type metering pump for filling,it is high in precision, the structure of the pump is easy to install and uninstall, and convenient for cleaning and sterilizing.
2. PLC control system, color touch screen display.
3.The filling head has the anti- dropping device
4. The filling precision is ±05%， the filling volume is 5-25ml( can be customized)
5. The frame of the machine and contact parts with material are bothmade from stainless steel, it meets with the GMP COMPLETELY.
采購中心
