CHP型系列二氧化碳培養箱
CHP Series CO2 Incubator
適用范圍Applicable range：
CO2培養箱是細胞、組織、細菌培養的儀器，廣泛用于微生物、醫學、農業科學、藥物學的研究。如：各種組織和細胞的培養，艾滋病、腫瘤、心臟疾病的研究，病毒繁殖、細菌培養、遺傳工程、試管嬰兒、克隆技術、醫藥學、微生物學、免疫學等。
CO2 incubator is an advanced equipment for culture of cell, tissue and bacteria, widely applied to research of microbiology, medicine, agricultural science and pharmacology, such as culture of various cell and tissue, research of AIDS, tumor and heart disease, virus proliferation, bacterium culture, bacterial culture, genetic engineering, test-tube baby, cloning technology, pharmacological science, microbiology, immunology, etc.
產品特點Features：
※微電腦智能控制器（數字顯示或液晶顯示），具有控溫、CO2氣體、門溫、水位、紫外燈、定時控制功能，還具有超溫、水位高低、安全保護、報警功能。
Microcomputer based inligent controller (digital display or liquid crystal display) has control functions of temperature control, CO2 gas, door temperature, water level, ultraviolet lamp and timing, also has safety protection functions of over-temperature, high/low water level and alarm.
※CO2進氣口配備微生物高效過濾器，針對直徑大小等于0.3um的顆粒，過濾效率高達99.99，有效過濾CO2氣體中細菌及灰塵顆粒。
CO2 inlet port is equipped with high performance microbiological filter that is aimed at the particles whose diameter is equal to 0.3um, the filter efficiency reaches 99.99, it is able
to filtrate off the bacteria or dust grain in CO2 gas effectively.
※紫外殺菌燈位于箱內后壁，可定期對箱體內部進行消毒，可有效殺滅箱體內循環空氣和增濕盤水蒸氣的浮菌，從而有效防止細胞培養期間的污染。
Ultraviolet germicidal lamp, located at rear wall inside the incubator, is able to disinfect the inner incubator regularly, kill the floating bacteria in circulating air or in vapor of humidifying pan in the incubator, it is able to effectively prevent pollution during the cell culture.
※CO2培養箱箱門可以對內玻璃門進行加熱，可有效防止玻璃門生冷凝水，防止由于玻璃門冷凝水帶來的微生物污染可能性。
Door of CO2 incubator is able to heat the inner glass door, preventing the glass from producing condensation water that would lead to microbial contamination.
※采用抗菌不銹鋼內膽，腔內四角圓弧，便于清潔擱架可調。
Adoption of antimicrobial stainless steel internal bladder, four corners in the chamber are of circular arc, it is convenient for cleaning, ａnd the shelf is adjustable
※升級型液晶智能控溫儀除以上功能外，還具有控溫更精確，配有進口紅外濃度探頭，CO2濃度更穩定，安全保護功能更完善，并可配RS-485接口，可連接打印機和計算機，記錄溫度參數的變化情況（選配）。
The upgraded type LCD inligent temperature controller has the higher precision in temperature control besides above-mentioned functions, it is equipped with the imported infrared concentration probe which brings more stable CO2 condensation and more prefect safety protection, in addition, it has RS-485 interface (optional) that is connected with the printer and computer to record the change of temperature parameters.
技術參數Technical parameters：：
型 號 Model
技術參數Tech. parameters | CHP-80（Q、S、E） | CHP-160（Q、S、E） | CHP-240（Q、S、E） |
容 積 Volume | 80L | 160L | 240L |
控制方式Control mode | 智能控制Inligent control | ||
控溫范圍Temp. range | RT+5～60℃ | ||
控溫精度Accuracy of temp. control | ±0.3℃ | ||
溫度分辨率Temp. resolution | 0.1℃ | ||
CO2范圍Rang of CO2 | 0-20% | ||
CO2精度Accuracy of CO2 | 0.1% | ||
CO2均勻性Homogeneity of CO2 | 5%時，±0.1%（紅外線傳感器） At 5%, it will be ±0.1%（IR sensor）
| ||
CO2報警CO2 alarm | ±0.1℃ | ||
CO2恢復時間CO2 recovery time | ≤濃度值×1.2min ≤concentration value ×1.2min | ||
加濕方式Humidification mode | 自然蒸發Natural evaporation | ||
工作環境溫度Temp. of working environment | +5～35℃ | ||
電 源 Power supply | ～220V 50Hz | ||
功 率Power | ≤500W | ≤700W | ≤1100W |
工作室尺寸Dim. of workroom（mm） | 500×400×400 | 500×500×650 | 600×550×750 |
外形尺寸Outline dim.（mm） | 550×510×840 | 650×610×990 | 750×650×1090 |
載物托架（塊）（標配）Shelves (normal) | 2 | 3 | 3 |
備注Remark | 注：“Q”為氣套式，帶“S”為水套式，帶“E”為液晶控制器 Note: “Q” represents gas jacket type, “S” represents water jacket type, “E” represents LCD controller. | ||
采購中心
