高效濕法混合制粒機工作原理:
粉體物料與粘合劑在圓筒形容器中由底部混合槳充分混合成濕潤軟材,然后由側置的高速粉碎槳切割成均勻的濕顆粒。
本機采用臥式圓筒構造,結構合理。
充氣密封驅動軸,清洗時可切換成水。
流態化造粒,成粒近似球形,流動性好。
較傳統工藝減少25%粘合劑,干燥時間縮短。
每批次干混2分鐘,造粒1—4分鐘,工效比傳統工藝提高4—5倍。
在同一封閉容器內完成,干混→濕混→制粒,工藝縮減,符合GMP規范。
整個操作具有嚴格的安全保護措施。

名稱 | 型號 | |||||||
10 | 50 | 150 | 200 | 250 | 300 | 400 | 600 | |
容積(l) | 10 | 50 | 150 | 200 | 250 | 300 | 400 | 600 |
產量(kg/batch) | 3 | 15 | 50 | 80 | 100 | 130 | 200 | 280 |
混合速度(r.p.m) | 300/600 | 200/400 | 180/270/ | 180/270 | 180/270 | 140/220 | 106/155 | 80/120 |
混合功率(kw) | 1.5/2.2 | 4/5.5 | 6.5/8 | 9/11 | 9/11 | 13/16 | 18.5/22 | 22/30 |
切割速度(r.p.m) | 1500/3000 | 1500/3000 | 1500/3000 | 1500/3000 | 1500/3000 | 1500/3000 | 1500/3000 | 1500/3000 |
切割功率(kw) | 0.85/1.1 | 1.3/1.8 | 2.4/3 | 4.5/5.5 | 4.5/5.5 | 4.5/5.5 | 6.5/8 | 9/11 |
壓縮 空氣耗量(m3/min) | 0.6 | 0.6 | 0.9 | 0.9 | 0.9 | 1.1 | 1.5 | 1.8 |
High efficiency wet mixing granulating machine principle of work:
The powder raw material and adhesive in a cylinder are mixed fully mixed into the wet paddle at the bottom of a soft material, and then by the side of the high-speed crusher and cut into uniform particles of wet.
High efficiency wet mixing granulating machine features:
The machine adopts horizontal cylinder structure, reasonable structure.
Inflatable sealing drive shaft, cleaning can be switched into the water.
Fluidized granulation, granule shape, good fluidity.
Compared with the traditional process to reduce the 25% adhesive, dry time shorten.
Each mixing in dry granulation 1 2 minutes, 4 minutes, compared with the traditional process to improve efficiency 4 to 5 times.
In a closed container, dry mixing, wet mixing, granulation, process reduction, meets GMP specifications.
The whole operation has strict security measures.
High efficiency wet mixing granulating machine technical parameters:
Name type
105015020025030040 600
Volume ( L ) 105015020025030040 600
Yield ( kg/batch ) 315508010013020028
Mixing speed (r.p.m ) 300/600 200/400 180/270/ 180/270 180/270 140/220 106/155 80/120
Mixed power ( kw ) 1.5/2.2 4/5.5 6.5/8 9/11 9/11 13/16 18.5/22 22/30
Cutting speed ( r.p.m ) 1500/3000 1500/3000 1500/3000 1500/3000 1500/3000 1500/3000 1500/3000 1500/3000
Cutting power ( kw ) 0.85/1.1 1.3/1.8 2.4/3 4.5/5.5 4.5/5.5 4.5/5.5 6.5/8 9/11
Consumption of compressed air ( m3/min ) 0.6 0.6 0.9 0.9 0.9 1.1 1.5 1.8