詳細介紹：
一、用途：
F-130型藥物粉碎機是一種小型中草藥粉碎機，對輕、重、軟、脆、韌、散、較硬纖維性物料及中成藥復方藥材的加工適應性強.能廣泛適用于制藥、食品、飲料、農藥、輕工、化工的小批量生產需要.本機不適用于黏度過大、油脂性強、熔點低的物料.
二、結構特點：
1、選粉不用羅篩，細度可達80-300目，并能隨時調節粉子的粗細度。
2、粉碎室內剩渣少，適應少量生產。
3、采用錘片、離心風選式結構，體積小、動力小耗電量低，維修保養和操作都比較方便。
三、主要技術性能：
1、粉碎錘片 zui大直徑130毫米
2、主軸轉數：4000轉/分
3、產量：以山楂核為準2-8公斤/小時，細度過60目篩，含渣0.3%
4、粉碎細度：80-300目
5、電動機功率：2.2千瓦（2810轉/分）
6、傳動帶：A型三角帶
7、錘片數量：16片
Detailed introduction:
One, use:
F-130 type drug pulverizer is a small Herb Grinder, light, heavy, soft, brittle, ductile, powder, hard fibrous material and Chinese traditional medicine medicinal material processing adaptability. Can be widely used in the pharmaceutical, food, beverage, pesticides, light industry, chemical industry and small batch production needs. This machine is not applicable on the viscosity is too big, fat and strong, low melting point materials.
Two, structural characteristics:
1, powder selection without Luo sieve, the fineness of up to 80-300, and can adjust the size of the powder.
In 2, a crushing chamber dregs less, to a small amount of production.
3, using a hammer, centrifugal winnowing type structure, small volume, low power consumption and low maintenance, repair and operation are convenient.
In three, the main technical performance:
1, crushing hammer maximum diameter 130 mm
2, spindle speed: 4000 rpm
3, yield: haw kernel for 2-8 kg / hour, fine through 60 mesh sieve, 0.3% containing slag
4: 80-300 head, grinding fineness
In 5, the motor power: 2.2 kW （ 2810 RPM）
In 6, the drive belt: A type belt
In 7, hammer quantity: 16 pieces
采購中心
