產品詳情：

GB系列·全陶瓷柱式粉碎機（打散機）
GB series · All ceramic column crusher (disperser)
工作原理：
設備粉碎腔內安裝一動一靜兩個粉碎盤，每個粉碎盤上裝有數十個粉碎柱，互相交錯，動盤在電機的帶動下高速旋轉，粉碎柱產生強大的沖擊力，顆粒狀物料落入粉碎腔后就會在粉碎柱的沖擊作用下細化，最終從內部擋圈下部的缺口處出料。
working principle:
Two crushing discs are installed in the crushing cavity of the equipment. Each crushing disc is equipped with dozens of crushing columns, which are staggered with each other. The moving disc rotates at high speed under the drive of the motor. After entering the crushing cavity, it will be refined under the impact of the crushing column, and finally discharged from the gap at the lower part of the inner retaining ring.

設備特點：

1.   利用了“機械沖擊”的原理，處理量相對較高，能耗低，且不易積料，清洗方便。
2.   沖擊磨損部位全部工程陶瓷防護，從而滿足多數高新材料避免金屬雜質污染要求（關鍵部位包括粉碎柱、擋圈等）。
3.   可作為氣流粉碎、機械粉碎等細粉碎設備的前道預處理裝置，也可更換不銹鋼篩網或配合振動篩生產最終產品；根據物料性質，可靈活選擇單機間歇式使用或配合后道收料設備連續式使用。
4.  

1. Using the principle of "mechanical impact", the processing capacity is relatively high, the energy consumption is low, and it is not easy to accumulate materials, and the cleaning is convenient.
2. All impact wear parts are protected by engineering ceramics to meet the requirements of most high-tech materials to avoid metal impurity contamination (the key parts include crushing columns and retaining rings, etc.).
3. It can be used as the front pretreatment device of fine crushing equipment such as air flow crushing and mechanical crushing. It can also replace the stainless steel screen or cooperate with the vibrating screen to produce the final product; according to the material properties, it can be flexibly selected for single-machine intermittent use or combined with the subsequent collection for continuous use of material equipment.
 
技術參數表(Technical Data Sheet)：

注：具體配置及處理效果需根據物料性質與加工要求確認，可與我司工程師溝通或來料試驗。
Note: The specific configuration and processing effect need to be confirmed according to the material properties and processing requirements, and you can communicate with our engineers or come to do materials processing test first.
實物圖片(Physical picture)：